Jetline Cutting Limited
Specialised Ultra High Pressure WaterJet Cutting
Jetline Cutting Limited was founded in 2001 with one small Ultra High Pressure WaterJet Machine and very little stock & housed in a small area of a industrial unit.
Less than 10 years later Jetline moved to larger premises incorporating 2 connecting units, one for manufacturing the second for material stock. We now deliver unbeatable quality and a fast turnaround service in ultra high pressure water jet cutting.
We have three waterjet cutting tables all supplied with 60000 psi of water pressure capable of cutting up to 200mm thick steel with the addition of abrasive garnet material mixed with the water.
At the other end of the spectrum we can also cut fine and very intricate shapes from thin soft materials such as rubber or foam using our Pure Water nozzle technology.
The technology is so advanced the number of material that can not be cut can be counted on one hand such as the materials the nozzles are made from, Carbide. Also process specific materials such as toughened glass would just shatter due to the material properties & structure.
Heavy or large material handling is carefully done by our vacuum lifting equipment attached to our two fork lift trucks capable of lifting upto 2.5 ton.
All our production is backed up by our two quality standards ISO 9001:2015 & ISO14001:2015
For Precision, Exact and Accurate Cutting
PowerJet table 3m x 2m
Our first machine purchased in 2001, a PowerJet table 3m x 2m useable bed size & Pump, was our first jump into WaterJet cutting utilising both abrasive & pure water systems. The pump was replaced in 2003 with the most upto date KMT UHP 50hp, part of the Streamline range, alongside this was the new KMT cutting head technology and abrasive control & metering system assuring the most efficient cutting available at that time.
Due to the age of the CNC controller system for the table we have since updated this three times as new operating systems and better versions became available.
Calypso Twin head gantry 4m x 2m
Our second, and most important investment, was the introduction of the latest Calypso Twin head gantry 4m x 2m useable bed size cutting table with the latest of the KMT 50hp streamline pump range. Also added to this combination was the latest in abrasive feed & metering systems assuring, once again, the best performance available. Also, by looking ahead we invested in the latest abrasive removal system to enable safe and environmentally friendly methods of used garnet to be bagged and sent for recycling.
Calypso 1.25m x 1.25m single head
The third, and most used for small quick jobs, is the Calypso 1.25m x 1.25m single head abrasive & pure water machine. This uses the same systems as the other machines, due to the available UHP water supply, and has it’s own abrasive feed & metering system.